Backflow Testing Reservoir
Backflow Testing & Compliance in Reservoir
VBA-accredited backflow testing for all property types in Reservoir, 3073. Same-day compliance certificates. Reports submitted directly to Yarra Valley Water.
Reservoir, 3073
Backflow Testing for Reservoir Properties
Reservoir is one of Melbourne’s largest suburbs by population, spread across the north of Darebin with retail centres at Broadway, Edwardes Street and Summerhill, and a substantial residential stock that runs from post war housing to recent townhouse development. Schools, sporting reserves and community facilities are spread throughout, and light industrial pockets sit along the rail corridor. Yarra Valley Water services the suburb.
If your Reservoir property has a testable backflow prevention device, annual testing by a VBA-accredited plumber is a legal requirement under Yarra Valley Water regulations. Non-compliance can result in formal notices, fines, and in serious cases, disconnection of your water supply.
12
months max between tests, as required by Yarra Valley Water
Who We Test For
All Property Types in Reservoir
Neighbourhood retail and food premises at Broadway, Edwardes Street and Summerhill, schools and childcare centres, sporting reserves and community facilities with grounds irrigation, medical practices, light industrial units and workshops along the rail corridor, and a large residential stock where irrigation systems and below ground rainwater tanks are common. Most properties carry a testable containment device at the meter.
Commercial Properties
Offices, retail premises, restaurants, cafés, and any business in Reservoir connected to the reticulated water supply with a testable containment device.
- Offices & retail
- Cafés & restaurants
- Shopping centres
- Mixed-use developments
Industrial Facilities
Manufacturing plants, warehouses, food production and chemical processing sites in Reservoir. High-hazard premises typically require RPZ valve testing.
- Warehouses & logistics
- Food production
- Chemical processing
- Car washes & laundries
Strata & Body Corporate
Apartment buildings, commercial complexes, and shared facilities in Reservoir with central or individual testable backflow prevention devices.
- Apartment buildings
- Commercial complexes
- Common area fire services
- Irrigation systems
Residential Properties
Homes in Reservoir with below-ground rainwater tanks, irrigation systems, bidets, or any property that has received a notice from Yarra Valley Water.
- Homes with rainwater tanks
- Below-ground irrigation
- Bidets & toilet douches
- New builds with notices
Our Services
What We Provide in Reservoir
Every service is delivered by our VBA-accredited backflow prevention plumber. We do not use subcontractors or generalists.
Annual Backflow Testing
AS/NZS 2845.1 compliant testing with same-day compliance certificates.
Repairs & Maintenance
On-the-spot minor repairs are available, and we carry common parts to every job.
Device Installation
Supply and installation of all testable backflow prevention device types.
Compliance Reporting
Direct submission to Yarra Valley Water within the required deadline.
RPZ Valve Testing
Full testing of high-hazard Reduced Pressure Zone assemblies.
Annual Reminder Program
We track your due date and contact you before it lapses, keeping your Reservoir property compliant.
The Local Testing Process
Seven Steps to Stay Compliant in Reservoir
Every Reservoir test follows the same clear process. Our VBA-accredited plumber handles the testing, paperwork, and submission so your property stays compliant.
Preparation
We confirm the device location, access requirements, and previous test details before starting at your Reservoir property.
Shut-off
We isolate the relevant water supply safely so the device can be tested without disrupting more of the property than necessary.
Test setup
Calibrated test gauges are connected to the device test ports and checked before pressure readings are taken.
Performing the test
We test each check valve and the relief valve on RPZ assemblies to confirm the device is operating to specification.
Recording results
All readings, device details, and pass or fail results are recorded for your Yarra Valley Water compliance report.
Issue certificate
Your compliance certificate is issued on the day of the test, with any repair recommendations explained clearly.
Submit to the water authority
We submit the completed report directly to Yarra Valley Water within 30 days of testing, so the lodgement is not left with you.
Why Choose Us
Reservoir's Trusted Backflow Testing Specialists
We specialise exclusively in backflow prevention. We are not plumbing generalists who add testing as a side service. That focus means faster response, deeper expertise, and compliance you can count on for your Reservoir property.
"Prompt, professional, and handled all the paperwork. Our annual compliance is in great hands."
Verified Google Review
Water Authority
Reservoir is Serviced by Yarra Valley Water
Properties in Reservoir (3073) fall under the Yarra Valley Water service area. All testable backflow prevention devices in this area must be tested annually, and results submitted to Yarra Valley Water within the required timeframe.
We are fully accredited with Yarra Valley Water and submit your compliance report on your behalf after every test, so you do not need to do anything. Your compliance certificate is issued the same day.
Reporting Deadline
Report within 30 days of testing
Nearby Areas
We Also Service Suburbs Near Reservoir
FAQ
Common Questions About Backflow Testing in Reservoir
Any that have in ground irrigation, a private fire service or a commercial kitchen or canteen will have a testable device, and grounds irrigation makes that common across the schools and reserves here. Each testable device is tested at intervals of no more than 12 months and reported separately, so a school with irrigation, a canteen and a fire service can hold three or more.
A tank above ground and not connected to the drinking water supply generally is not. The requirement comes when a below ground tank is plumbed into the drinking water supply, because the tank water can be drawn back toward the main. If your tank tops up from the mains or feeds back into household plumbing, it is worth having it checked.
All properties in Reservoir serviced by Yarra Valley Water are required to have testable backflow prevention devices tested at intervals of no more than 12 months. Missing the annual window can trigger compliance notices and, in serious cases, disconnection of your water supply.
Only a plumber holding VBA accreditation in backflow prevention can legally test a device and issue a compliance certificate. A standard plumbing licence is not sufficient. Aussie Backflow holds VBA Licence No. 28465 with full backflow prevention accreditation.
A failed test does not necessarily mean replacement. Most failures involve worn seals, debris, or pressure irregularities that can be repaired on the same visit. We carry common parts and will retest after any repair. If replacement is required, we will advise on options.
Yes, report submission is included in every test. After testing we submit your compliance certificate directly to Yarra Valley Water on your behalf, within 30 days of testing.
Most single-device tests take 20 to 45 minutes. Multi-device properties take longer depending on the number and types of devices. We confirm an estimated duration when you book.
Yes, we test backflow prevention devices for residential, commercial, industrial, and strata properties across Reservoir and surrounding suburbs. We hold accreditation with Yarra Valley Water and all other Melbourne water authorities.
Need Professional Backflow Testing?
Aussie BACKFLOW provides accredited backflow testing and compliance reporting across Melbourne. Contact our accredited specialists today.